Machine frame multi-saw Altai -M450

Multi-saw power saw bench Altai-M450

Multi-saw machine Altai M450  designed for longitudinal sawing  carriages or beams on edged boards. The thickness of the resulting board from 12mm. Due to the thin cut, about 2.7 mm, the machine is effective when sawing into planks and thin boards.

Benefits:

Altai M450 is characterized by a quick payback period due to:

• high performance (from 5m3 per shift) - a small thickness of cuts (about 2.7mm)
• low power consumption for such machines (about 15kW)
• minimum number of staff and ease of management

Multi-saw machine Altai M450 can be mounted without a special foundation and installed on a flat, solid surface (for example on a concrete slab).

For maximum productivity, the feed drive is equipped with a frequency converter, which allows you to smoothly adjust the feed speed to the optimum, according to the ammeter of the load of the main motor. However, it is possible to work with the frequency converter switched off i.e. with a constant feed rate.

For sawing a short gauge, the feed roller is equipped with a centering trolley.

Contents of delivery:

• multisaw frame block assembly - 1 pc
• live rolls with a guide trolley (section) - 4pcs
• set of partitions according to customer size - 1 pc
• container saws - 20pcs
• torque wrench - 1 pc.

Sharpening device"Altai-zrp30" for saws of a frame saw  as required, purchased separately. Grinding device cost RUB 25000

Схема работы: